| 1. Number of sections 2.
Phasing point/tolerance
3.
Total resistance and tolerance per section at 25°C
4.
Required resolution per section
5.
Absolute minimum resistance/voltage at end points
6.Resistance temperature characteristic_______%/C
7.Conformity requirements including electrical angles & overtravel
8.Voltage breakdown ac ____dc____at standard conditions.
9.
Insulation resistance _____________megohms @500 v dc.
10.
Wattage ______________at____________°C.
11.Taps:number __________location and tolerance ______.
12.
Peak noise _______ohms. |
13. Mechanical travel _________ °/ ________°. 14.
Maximum torque: start ________ run ___________ (oz.in.).
16.
Stop strength ________ in.-lb.
17.
Maximum weight __________ oz.
18.
End Play _____________ in. (maximum).
19.
Shaft: diameter / tolerance _____ length ______ special
end configuration.
20.
Mounting Configurations:
- Panel Mount size / length _______, pilot diameter ______, pilot
depth _________.
- Three hole mount: bolt circle diameter ____, thread size ____depth.
- Servo mount; pilot diameter ______, pilot width ______,
- flange diameter _________, flange width ______,
- recess diameter ________, recess width ___________.
21.
Other ______________________ |
