| 1. Number of sections
2. Phasing point/tolerance
3. Total resistance and tolerance per section at 25°C
4. Required resolution per section
5. Absolute minimum resistance/voltage at end points
6.Resistance temperature characteristic_______%/C
7.Conformity requirements including electrical angles & overtravel
8.Voltage breakdown ac ____dc____at standard conditions.
9. Insulation resistance _____________megohms @500 v dc.
10. Wattage ______________at____________°C.
11.Taps:number __________location and tolerance ______.
12. Peak noise _______ohms. |
13. Mechanical travel _________ °/ ________°.
14. Maximum torque: start ________ run ___________ (oz.in.).
16. Stop strength ________ in.-lb.
17. Maximum weight __________ oz.
18. End Play _____________ in. (maximum).
19. Shaft: diameter / tolerance _____ length ______ special end configuration.
20. Mounting Configurations:
- Panel Mount size / length _______, pilot diameter ______, pilot depth _________.
- Three hole mount: bolt circle diameter ____, thread size ____depth.
- Servo mount; pilot diameter ______, pilot width ______,
- flange diameter _________, flange width ______,
- recess diameter ________, recess width ___________.
21. Other ______________________ |
