|
1
5/8"
C158"
1 5/8" Ganging • M-158" Low
Cost Wire Wound • CF158 Conductive
Plastic
C-158
1 5/8" Diagrams and Specifications
TYPICAL
RESOLUTION VALUES C-158 |
| Ohms |
1K |
5K |
10K |
25K |
50K |
100K |
| Approximate
Total Turns |
70 |
1100 |
1200 |
1400 |
1800 |
1950 |
| Mountings: |
Servo
type or single hole mounting with optional, non-turn device. |
| Taps: |
Up
to 40 adjustable taps, mounted on universal mounting ring±
0.5° on order FIELD INSERTABLE: TAP –permits p to
40 taps, in 320°, spaced 6° apart in 2" diameter.
Special configurations permit taps set zero degrees apart. |
| Clamp
Rings: |
Cam
action, one-piece stainless steel. Stainless steel socket screws.
|
| Double
Shaft Extensions: |
Available
with special length shafts for coupling to other components.
|
| Dust
Covers |
Standard
aluminum covers supplied with each unit. Permanent metal or
transparent covers are also available. |
| *Independent
Linearity: |
±
5% standard. ± 1% on order. |
| Resistance: |
±
5% standard. ± 1% on order. |
| Wire: |
Various
alloys are used depending on particular application. Generally,
wire with temperature coefficient of ± 0.00002 is used.
|
| Specifications
- C-158 |
| Rotation: |
360°
mechanical; 320° ± 3° electrical is standard.
± 1° on order |
| Power
Rating: |
4
Watts |
| Contact
Materials |
3-wiper
Palinery contact brush, precious metal slip ring contacts, coin
silver end clips. |
| Rotational
Life: |
Over
1,000,000 cycles. |
| Case: |
Precision
machined aluminum with blue Aluminlite finish for C-200 and
gold Aluminlite finish for BC-200. |
| Shaft: |
2495
to .2498 diameter, precision ground stainless steel, passivated
for maximum corrosion resistance. |
| Terminals: |
Standoff
type, gold plated brass. |
| Insulation: |
Fungus
resistant insulating materials, withstand 1000 volts AC breakdown.
|
*
Independent linearity is the deviation in percent of the total measured
resistance of the actual resistance at any point, from the best
straight line drawn through the resistance vs. rotation curve. The
slope and position of the line can be adjusted to make these deviations
a minimum.
C-158
Ganging
C158"
1 5/8" Ganging • M-158" Low
Cost Wire Wound • CF158 Conductive
Plastic
|
